RUTHERFORD COUNTY I-24
The resurfacing on I-24 from E of Epps Mill Road through Bedford County to the Coffee County Line.
· Nightly, 8 p.m. - 5 a.m., There will be alternating lane closures EB and WB for paving and pavement marking activities.
RUTHERFORD COUNTY I-840
The resurfacing of I-840 from the West Fork Stones River Bridge to near Exit 61
· Nightly, 8 p.m. - 5 a.m., There will be alternating lane closures on I-840 to install guardrail and shoulder stone.
The grading, drainage, construction of two concrete bulb tee beam bridges, signals, and paving on SR-266 (Jefferson Pike) from SR-102 (LM 5.0) to E. of I-840 (LM 9).
· Nightly, 8 p.m. - 5 a.m., There will be alternating lane closures on I-840 to remove falsework for the overpass bridge widening.
RUTHERFORD COUNTY SR 10
The resurfacing on S.R. 10 from the Bedford County line (L.M. 0.00) to S.R. 269 East. (L.M. 4.29)
· Daily, 6 a.m. - 7 p.m., There will be temporary lane closures for milling and paving operations.
RUTHERFORD COUNTY SR 96
The resurfacing on SR-96 from Carol Drive (L.M. 6.45) to near I-24 (L.M. 9.5)
· Nightly, 8 p.m. - 5 a.m., There will be alternating lane closures on SR-96 for milling operations.
RUTHERFORD COUNTY SR 99
The grading, drainage, construction of retaining walls, signals and paving on SR-99 (New Salem Hwy) from near I-24 to SR-96 (Old Fort Pkwy)
· Nightly, 8 p.m. - 5 a.m., There will be nighttime flagging operations for open cut installation of utility casing.
RUTHERFORD COUNTY SR 266
The grading, drainage, construction of two concrete bulb tee beam bridges, signals, and paving on SR-266 (Jefferson Pike) from SR-102 (LM 5.0) to E. of I-840 (LM 9).
· Daily, 9 a.m. - 3 p.m., There will be flagging operations for paving activities to shift traffic in several locations throughout the project.
WILSON COUNTY SR 109
The grading, drainage, signals and Paving on SR-109 at the I-40 off ramps
· Nightly, 8 p.m. - 5 a.m., Temporary lane closures for grading, drainage and signal installation.